Glass Stem Instructions

The Deluxe Glass Stem will arrive with black plastic covers. Your Glass Stems have no screen and has a greater volume than the XL Brass Stem (which we have discontinued). One must place a small un-screened piece of plant material into the stem first as a plug . Be sure the plug is loose enough to let air slowly seep through. Next place more material as desired into the barrel. Do not compact the material. It is best to fill the barrel less than full . Next use the enclosed bamboo probe, gently twist it using the sharp end to create a opening through the middle of the material lodged in the tip of the stem. Insert the stem into the Eterra and preheat 5 to 10 seconds (or as desired, the glass takes longer to heat up and cool down). Inhale VERY VERY SLOWLY. If you inhale too fast the material may dislodge. 3 to 4 seconds should do it (timing will vary due to moisture content) Important: Remove the stem from the Eterra and continue to slowly inhale. Careful the tip of the glass stem remains hot a lot longer than the brass stem tip. The Glass stem can hold up to 6 puffs. After each puff or beginning on puff 3 use the bamboo probe to "slake" or tease off the top "toasted " part of the tobacco or herb being vaped. Employ a twirling or back and forth movement with the bamboo probe across the portion to be removed. Then hold the stem horizontal and lightly tap it into the waste bag (provided) Continue slaking after each remaining puff for best results.

BE VERY CAREFUL TO INHALE VERY SLOW DO NOT SUCK HERBAL MATERIAL INTO YOUR MOUTH. THE GLASS STEM IS DELICATE. CAREFUL NOT TO BREAK IT. Always be sitting or stationary when using the Moxie with the glass stem. if the stem should break, carefully contain it, return it with $5 and we will fix it and return it (be sure to thoroughly clean the stem inside and out with rubbing alcohol before returning it to Solaria.. We cannot fix unclean stems and will return your payment if the stem is not acceptably clean.

Return to General Eterra Information